apcupsd

classic Classic list List threaded Threaded
4 messages Options
Reply | Threaded
Open this post in threaded view
|

apcupsd

Tilo Roeder
Hi,
are there knows problems with apcupsd on macOS Sierra (10.12)?
After installing it only the „?“ is shown in the icon … no ups is found.
The same also after unplugging and replugging the USB-cable.
UPS (APC ES 550) was working fine under 10.9

Regards
Tilo
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
_______________________________________________
Apcupsd-users mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/apcupsd-users
Reply | Threaded
Open this post in threaded view
|

Re: apcupsd

srogers1@gmail.com
Tilo Roeder wrote
Hi,
are there knows problems with apcupsd on macOS Sierra (10.12)?
After installing it only the „?“ is shown in the icon …
ditto for me - any leads on this?  UPS is an APC RS 1200
No luck with obvious stuff - restarting and verifying firewall off.

Regards,
SR
Reply | Threaded
Open this post in threaded view
|

Re: apcupsd

srogers1@gmail.com
After updating to 10.12.2, it started working again.  

Hopefully that fixes it for anyone else doing a Sierra update. If it's broken after update, just keep going.

SR
Reply | Threaded
Open this post in threaded view
|

Re: apcupsd

William P.N. Smith
And broken again in 10.12.3?  I’m getting continuous (every 10 seconds):

Communications with UPS lost.

in /var/log/apcupsd.events

and alternating popups every minute(?) complaining of 
NETWORK ERROR for UPS ‘<unknown>'
and
COMMLOST from UPS ‘<GH_SHELL>’ (which is the name of the UPS in the config file)

Anyone else having issues?

I’m running :
apcupsd 3.14.14 (31 May 2016) darwin

Which appears to be the latest release.

grep "^[^#;]" /etc/apcupsd/apcupsd.conf
(all non-commented lines) results in:

UPSNAME GH_SHELL
UPSCABLE usb
UPSTYPE usb
DEVICE 
LOCKFILE /var/tmp
SCRIPTDIR /etc/apcupsd
PWRFAILDIR /etc/apcupsd
NOLOGINDIR /etc
ONBATTERYDELAY 6
BATTERYLEVEL 25
MINUTES 5
TIMEOUT 0
ANNOY 300
ANNOYDELAY 60
NOLOGON disable
KILLDELAY 0
NETSERVER on
NISIP 0.0.0.0
NISPORT 3551
EVENTSFILE /var/log/apcupsd.events
EVENTSFILEMAX 10
UPSCLASS standalone
UPSMODE disable
STATTIME 0
STATFILE /var/log/apcupsd.status
LOGSTATS off
DATATIME 0

Am I doing anything wrong?

Thanks!

On Dec 18, 2016, at 9:54 AM, [hidden email] wrote:

After updating to 10.12.2, it started working again.  

Hopefully that fixes it for anyone else doing a Sierra update. If it's
broken after update, just keep going.

SR



--
View this message in context: http://apcupsd-ups-control-software.10985.n7.nabble.com/apcupsd-tp9782p9862.html
Sent from the Users mailing list archive at Nabble.com.

------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
_______________________________________________
Apcupsd-users mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/apcupsd-users


------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
_______________________________________________
Apcupsd-users mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/apcupsd-users